Buying diamond jewelry can be fun, exciting and confusing. Whether you’re considering a gift of diamond jewelry for someone special or as a treat for yourself, take some time to learn the terms used in the industry. Here’s some information to help you get the best quality diamond jewelry for your money, whether you’re shopping in a traditional brick and mortar store or online.
A diamond’s value is based on four criteria: color, cut, clarity, and carat. The clarity and color of a diamond usually are graded. However, scales are not uniform: a clarity grade of “slightly included” may represent a different grade on one grading system versus another, depending on the terms used in the scale. Make sure you know how a particular scale and grade represent the color or clarity of the diamond you’re considering. A diamond can be described as “flawless” only if it has no visible surface or internal imperfections when viewed under 10-power magnification by a skilled diamond grader.
As with other gems, diamond weight usually is stated in carats. Diamond weight may be described in decimal or fractional parts of a carat. If the weight is given in decimal parts of a carat, the figure should be accurate to the last decimal place. For example, “.30 carat” could represent a diamond that weighs between .295 – .304 carat. Some retailers describe diamond weight in fractions and use the fraction to represent a range of weights. For example, a diamond described as 1/2 carat could weigh between .47 – .54 carat. If diamond weight is stated as fractional parts of a carat, the retailer should disclose two things: that the weight is not exact, and the reasonable range of weight for each fraction or the weight tolerance being used.
Some diamonds may be treated to improve their appearance in similar ways as other gemstones. Since these treatments improve the clarity of the diamond, some jewelers refer to them as clarity enhancement. One type of treatment – fracture filling – conceals cracks in diamonds by filling them with a foreign substance. This filling may not be permanent and jewelers should
tell you if the diamond you’re considering has been fracture-filled.
Another treatment – lasering – involves the use of a laser beam to improve the appearance of diamonds that have black inclusions or pots. A laser beam is aimed at the inclusion. Acid is then forced through a tiny tunnel made by the laser beam to remove the inclusion. Lasering is permanent and a laser-drilled stone does not require special care.
While a laser-drilled diamond may appear as beautiful as a comparable untreated stone, it may not be as valuable. That’s because an untreated stone of the same quality is rarer and therefore more valuable. Jewelers should tell you whether the diamond you’re considering has been laser-drilled.
Imitation diamonds, such as cubic zirconia, resemble diamonds in appearance but are much less costly. Certain laboratory created gemstones, such as lab-created moissanite, also resemble diamonds and may not be adequately detected by the instruments originally used to identify cubic zirconia. Ask your jeweler if he has the current testing equipment to distinguish between diamonds and other lab-created stones.
For more information on jewelry and gemstones, we cordially invite you to visit http://www.morninglightjewelry.com to pick up your FREE copy of How To Buy Jewelry And Gemstones Without Being Ripped Off. This concise, informative special report reveals almost everything you ever wanted to know about jewelry and gemstones, but were afraid to ask. Get your FREE report at http://www.morninglightjewelry.com